A classic for any style of acrobatics, from the Russian Yakovlev factory, the Yak 54 is one of the most instantly recognisable outlines in the sky at any club.
Its round fuselage provides some of the nicest roll manoeuvres imaginable and with our kit the same can be expected. Designed for slightly more classic 3D, it can still perform all the manoeuvres yet not make the pilot a nervous wreck each time they try something new. A carefully designed wing section and moderate control surfaces by todays standards make everything happen just that little bit slower, ideal for early 3D steps or if you just love low and slow just inches off the deck!
|Model:||Yak 54 – 55%|
|Wing area:||6,290 “² (40,580 cm²)|
|Weight:||65.9lbs (29.9kg) kit only|
Motor: 400cc or equivalent electric
Servos: 16 high torque (minimum 20kg) plus throttle // Uses x4 per aileron, x2 per elevator and x4 on rudder
Also requires all the usual accessories such as transmitter, receiver, propeller, batteries, powerbox, extension leads and possibly other small accessories.
Colour scheme YAK-06:
References: Oracover 21-057, 21-010, 21-036, 21-037/ Ultracote HANU845, HANU870, HANU842, HANU843
Colour scheme YAK-CH8:
References: Oracover 21-057, 21-023, 21-091, 21-010 / Ultracote HANU845, HANU866, HANU881, HANU870
Colour scheme YAK-CH9:
References: Oracover 21-022, 21-071, 21-091, 21-033 / Ultracote HANU883, HANU874, HANU881, HANU872
More photos available on the Pilot-RC facebook: www.facebook.com/pilotrcmodel