Laser V3 – 103″ (2.61m)

GALLERY:

Current version of laser 103″ V3

New Laser V3 what is changed from V2 ?

1. New Wing design improved Aileron for more precise and less drag in tip wing

2.Update Fueslage about alignment and Canopy for more smooth aerodynamic.

3.Additional Carbon plate on quick release Canopy for more nice look and fix loss covering problem

4. We change Landing gear to be 2 piece and hide landing gear for more nicely and fix often problem

about loss covering. now problem about loss covering will not happen anymore.

5.New System quick release stabilizer

6.add some detail on Cowl and change spinner from 4.5” to 5”

7. improve some structure for more strong and lighter.

8. change Cowling from cover fueslage to be paste on firewall

9. add Carbon plate for cooling Canister in the bottom of fueslage.

** this LASER V3 whole design is not base from scale Laser 200

only cowl is base from Laser 230.

all whole design is base from our pilot Laser V2

Just edit some curve of canopy for less drag and

we design this rc plane for high performance 3D charactoristic.

seen in these pictures:

Photos of original Laser:

FEATURES:

• NEW! Full Carbon reinforced fuselage and wing using carbon laminated wood.  
• Genuine German Oracover (Ultracote) covering
• Highly prefabricated, experienced builders can have air ready in under a day
• Pre-installed hinges (glued and pinned)
• Internally mounted cowling – so no external screws exposed
• Includes cooling baffles
• Easy canister installation due to open construction
• Removable rudder (as well as removable wings and stabs)
• Laser engraved motor mounting position 
• Push-Pull system for Rudder servos

INCLUDED HARDWARE:

• Complete air frame with all basic accessories (such as carbon fibre main undercarriage, tail-gear assembly and wing-tubes as well as fibreglass control horns and wheel pants)
• Pre-installed hinges and pre-mounted canopy
• Fuel tank and fuel tubing pre-prepared, fuel dot and breather valve
• Wheels, axels and wheel pants
• Pre-prepared pull-pull wires and pushrods with ball links
• Matching carbon spinner, 5″

CRASH KITS AVAILABLE FOR THIS MODEL:

• Landing gear repair package. Includes the wooden parts required to repair the damage often suffered around the landing gear area.
• Front fuselage repair package. Includes the wooden parts required to repair the damage often suffered around the front of the model
• Please note that additional or alternative spare wood outside of the above Packs is not available to order.

REQUIRED HARDWARE:

Motor: 100-130cc or equivalent electric

Servos: 7-8 high torque (minimum 20kg) plus throttle // Uses x2 per aileron, x1 per elevator and x1 or x2 on rudder

Also requires all the usual accessories such as transmitter, receiver, propeller, batteries, powerbox, extension leads and possibly other small accessories.

PILOT-RC RECOMMENDED HARDWARE:

• Servos: Pilot-Rc PW48AH (48Kg – 0,10s at 8,4v)
• Servo arms: Pilot-Rc 1,6″ Aluminium arms (included with Pilot-Rc servos)
• Wingbags: Pilot-RC wingbags

COLOUR SCHEMES AVAILABLE:

Colour scheme Laser 07 Green : 
References: Oracover 21-010, 21-043, 21-071, / Ultracote  HANU870, HANU866, HANU903, HANU874

Colour scheme Laser 08 Orange : 
References: Oracover 21-010, grey covering , orange covering, / Ultracote  HANU870, grey covering, orange covering

Colour scheme Laser 09 Ryu Color Scheme : 
References: Oracover 21-010, 21-023 , 21-091,21-071,21-050,light blue covering / Ultracote  HANU870, HANU866,HANU881,HANU874,HANU873, light blue covering

Build information

COWL SIZE:

A: 335mm – B: 330mm – C: 307mm – D: 348mm

EXHAUST TUNNEL SIZE:

A: 603mm – B: 103mm – C: Unlimited – D: 131mm – E: 172mm – F: 192mm

Due to the open tunnel design in the Laser, there is no backplate (measurement C) so there is no limit to the length of exhaust that can be used.

RUDDER HORNS AND PULL PULL LOCATION:

A: 31mm – B: 55mm – C: 60mm – D: n/a – E: 8.5mm

EXTENSION WIRE LENGTHS:

Throttle:
40cm

Each aileron:
25cm + 75cm
(nearest servo and furthest servo – to reach receiver direct)

Each elevator:
150cm

Rudder:
140cm
(when using direct – if installing pull pull, no required extension)

CENTER OF GRAVITY:

194mm
Measured back from leading edge of the wing at the fuselage.

You will find a laser engraved C.G. emblem on the inside of the fuselage, located close to the wing tube, which also shows the exact location for Center of Gravity.

FULL BUILD MANUAL: