FY-40A Flight Stabilization System

FY-40A Standard Configuration:

• FY-40A control module * 1
• RC receiver connecting wires * 1
• Velcro double sided tape * 2
• Instruction manual * 1
• Gyro sensitivity adjustment screwdriver* 1

Operating Principle And Function
FY-40A has an integrated three-axis gyro and three-axis accelerometer which controls the aircraft movement in three-dimensional space. By using your remote control, the unit can be turned on or off for the following functions:
Mode 1: FY-40A Deactivated Mode In this mode, the FY-40A stabilization function is turned off. The aircraft is completely under the control of the pilot.
Mode 2: 3D Control Mode In this mode, the balancer utilizes its 3-axis gyroscope to sense roll velocity and flight attitude. If no input is given by the pilot (sticks in the middle position) the FY-40A will lock the current aircraft attitude. This prevents rolling of the aircraft at the axial plane and maintains its current posture. Therefore the aircraft can be easily maneuvered to complete a variety of 3D flight with added stability and smoothness.
Mode 3: Auto Stabilization Mode In this mode, the FY-40A will automatically command the aircraft control surfaces to maintain level flight at all times.

Technical Specification And Working Requirement:

• Input Voltage : 4.0 ~ 6.0 Volt;
• Current Draw : 50mA (5V);
• Size : 45mm x 30mm x 9 mm;
• Weight (Excluding Wires) : 17g;
• Temperature Range : -25 ° C ~ +70 ° C;
• Maximum Rate Of Rotation : ? 2000 °/s;

Stabilization System Aircraft Suitability:

• Traditional layout fixed-wing aircraft 
• Flying wings with rudder
• Flying wings with no rudder
• Airplanes with no ailerons (rudder and elevator only) 
• V-tail airplanes with aileron and with no ailerons

integrated 3 axis gyro Specifications:

• FPV Gyro stabilizer FY-40A
• three-axis gyro
• three-axis accelerometer
• auto stabilization mode
• 3D mode