Corona 2.4G 8CH CR8D V2 DSSS Receiver With CT8J Transmitter Module JR Compatible

Description:
Brand Name: Corona
Item Name: CR8D(V2 DSSS)+CT8J combo
Compatible with JR 347/388/783/U8/PCM10/PCM10S/PCM10SX/ PCM10IIS/8103/J9303/MX-22/MX-24S/PX/9XII,Graupner MC16

Specification of CR8D:
Item Name: CR8D
Version: V2 DSSS
Band: 2.4G
Channel: 8
Weight: 13.1g
Range: >1.5km/4900ft
Sensitivity: -100dbm
Dimension: 46.6x26x14.9mm(1.83"x1"x0.58")
Operating Voltage: 4.8V-6V
Operating Current: 30mA
Transmission Rate: 128kpbs
Resolution: 10bit
Delay: 22ms

Specification of CT8J:
Item Name: CT8J
Weight: 34.9g
Dimension: 63.9X48.5X36.5mm(2.51"x1.9"x1.43")
Operating Voltage:  6.0V-13.0V
Operating Current: 100mA
Output Power: <10mW
Resolution: 10bit

Binding Procedure:
1,Turn on the transmitter, adjust the transmitter to PPM mode and then turn off the transmitter.
2,Hold down the button on the transmitter to turn on the transmitter module,then release the button, (Note: Do not keep pressing the button more than 3 seconds, otherwise it's ID will randomly change) LED on the module will flash between the red and green indicating the transmitter is ready to bind with the receiver.
3, Press the button on the receiver and supply power to the receiver. LED on the receiver will flash twice, indicating that the receiver has recognized the transmitter. Turn off the power of transmitter and receiver.
4,Supply power to the receiver(without pressing the button)  and then turn on the transmitter (also without pressing the button), LED on the transmitter is yellow. Transmitter and receiver connection is usually established within 15-20 seconds. If the LED on the receiver is solid red indicating that the receiver begins to work.
After setting up the receiver and transmitter,you only need to do step 4 before flight.

Features:
Small size and light weight.
Long control range,can reach to 1.5km.
With  3dbi gain antenna,can ensure uniform distribution of wavelengths in the range of emission.
One key search more convenient setting mode.
High-performance receiver antenna can ensure the aircraft in any attitude can receive the signal.
Unique design allows easy installation and ensure its stability.

Note: This is the V2 DSSS version combo.not compatible with V1 receiver or transmitter.

Package Included:
1x Corona CR8D With CT8J combo