FPV Combo 5.8Ghz Transmitter Receiver Monitor 800TVL

RC FPV Combo 5.8Ghz 8CH 200mw Audio Video Transmitter 3KM Range Receiver HD Monitor 800TVL Camera For CCTV FPV DJI Phantom QAV250

- Working frequencies:

Package Includes:

5.8Ghz 8ch 200MW Transmitter x 1

RC805 Receiver x1

800TVL 140 degree 2.1MM Camera x 1

HD 800x480 no blue Monitor x 1

Sun hood x 1

Monitor mount support for Remote controller x 1

T or XT60 plug power cable for the monitor and receiver x 1

This item includes all cables,it is very easy to install,No soldering.

So the monitor and receiver can use one 3S lipo battery.

And the tranmsitter can use the 3S lipo battery from the drone.

How to use them? check this picture.

Details:

800TVL 140 Degree FPV Camera

Best camera for QAV250 F450 F550 DJI FPV.

Product Weight: 13g

Size: 35 * 35 * 35mm (not including bracket)

Imaging System: 800TVL ccd 140 Degree 2.1MM line color

Support format: PAL mode,(if you need NTSC mode,please note us)

Features:

• 7.0 inch TFT LCD Display

No blue when lose signal

• Ideal for use with FPV
• 800 x 480 High Resolution Display
• LED Backlight
• 16:9 Display Ratio
• 15ms Response Time
• 500:1 Contrast Ratio
• Wide 6~18V DC Input Voltage Range


Specs:
Panel Size: 7.0 inch
Panel Type: TFT LCD
Resolution: 800x480
Backlight: LED
Horizontal Frequency Range: 30~60kHz
Field Frequency Range: 50~75Hz
Dot Pitch: 0.0642 (W) x 0.1790 (H) mm
Display Ratio: 16:9
Brightness: 400 cd;
Contrast Ratio: 500:1
Response Time: 15ms
Viewing Angle: 70°/70° (L/R) 50°/60° (U/D)
Input Voltage: DC 6~18V
Power Consumption: ≤ 5W
Working Temperature: -20°C ~ 60°C
Storage Temperature: -30°C ~ 70°C
Dimensions: 182 x 127 x 32mm
Weight: 363g

5.8G 200mW AV wireless receiver and transmitter RC805+TS351

Features of 5.8G 200mW AV wireless receiver and transmitter:
5.8G 8ch transmitter
With channel DIN-switch to change channels

Specificaitons of 5.8G 200mW AV wireless receiver and transmitter:
Transmitter frequency:5705-5945MHz;8CH
Transmitting Power:200mW/23dBm
Transmitting distance:>2000m(open area)
AV input:analog AV signal input
power supply:6.5-15 volts
Current supply:200mA
Size:55*26*17mm
Remark:The transmitter\'s power input is ranging from 7-12V,however the voltage outptu from the TX for the camera us 0.5V,lower than the input power.It\'s suggested to use 3S lipo 11.1V battery.
Note:antennas must be attched before powering on.

Default: Antenna connector:SMA(Inside the needle)

Frequency of each channel:
CH1:5705 CH2:5685
CH3:5665 CH4:5645
CH5:5885 CH6:5905
CH7:5925 CH8:5945

Receiver:
Receiving frequency:5725-5865MHz;8CH
Receiving sensitivity:-90dBm
Double lines AV output:analog AV signal output
Power supply voltage: 8-12V
Supply current: 100mA
Dimension: 75*54*15
Remark:The receiver\'s power input is ranging from 8-12V,dual AV output is supported
Note:the av cable uses 3.5mm plug on the receiver RC805

Default: Antenna connector:SMA(Inside the needle)

Note:the av cable uses 2.5mm plug on the receiver RC805

FPV pictures: